Hobby & Collectables store with the theme Model Railways and Scenery

Track rectifier bridges over isolating connections in just one direction (for running though signaled sections in the opposite direction) or protecting the ends of hidden sidings. Not suitable for use with digital layouts.

Molded version of the BR 65-DE-19-A USA TC as the Rh 600 of the NS in Era III. This nicely shaped model includes all of the country-specific details of the diesel locomotive.

Can be adjusted through a range of about 10 to 35 ohms (Not over 2 watts continuous operation!) By this mean the power to the locomotive is reduced in pre-determined sections of track, as for example down grades, slow zones and station approaches. Not suitable for digital operation.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire.

For operating uncoupler tracks, or momentary power feed to isolated sections.

Interference suppressor included. This track section is required as the first feeder track for each power circuit (= power pack). The feeder clips are removable.

Electric turnout mechanism left for ROCO LINE turnouts without roadbed.

Electric turnout mechanism right for ROCO LINE turnouts without roadbed.

For the new Märklin standard

Length 1/1 = 180 mm / 7-3/32". Facilitates transition from K to M track.

This is an improved kit for upgrading C Track turnouts. It has a double solenoid mechanism with end shut-off contacts.

German Federal Railroad (DB) type O 02 and O 11 cars. "Schwerin" and "Nürnberg" Association designs.